Custom-made 3D printing, in Hong Kong
A custom-made centre for 3D printing
Tell us what you want in a chat. We draw it, build the 3D model, and you approve both before you pay. Designed from nothing, or fitted to something you already own - if we have measured it.
- A drawing and a 3D model before you pay
- Resin on LCD, tough parts on FDM
- FPS, PayMe or card
Examples
Pieces made here
Five real orders. You describe it, we draw it, and you turn the model around before anything is printed.
-
MP0089
Flower ring
A figure resting inside a ring of blossoms.
Turn it in 3D Flower ring -
MP0087
The throne
A crowned figure seated on cut stone.
Turn it in 3D The throne -
MP0083
The staff
A warrior standing on broken rock, staff in hand.
Turn it in 3D The staff -
MP0080
Mountain prayer
A praying figure whose hair becomes a mountain, a dragon and a phoenix.
Turn it in 3D Mountain prayer -
MP0070
Dragon and ruins
A dragon over a burning castle, facing a figure with a sword.
Turn it in 3D Dragon and ruins
How a piece is made
From a photo to clear resin
-
You send a photo
Any clear photo of your pet, toy or keepsake, and a few words about what you want.
They typed
-
The bot draws it
A picture of your idea to check first. Change it until it is right, or ask for more sides.
-
It becomes a 3D model
Turn it around on your phone and check the size, before you pay for anything.
-
Printed in clear resin
Cast in crystal-clear resin, washed, cured, checked and posted to you. This one is 80 mm tall.
-
Made to order
-
-
The face of your fan, designed by you
The cover that clips onto a cooling-vest fan, with the pattern cut through it by you - the outer ring, the net, and what sits in the middle. Printed in ASA on the filament machine, and it fits because we measured the fan, not because a photo looked right.
The face of your fan, designed by you
The cover that clips onto a cooling-vest fan, with the pattern cut through it by you - the outer ring, the net, and what sits in the middle. Printed in ASA on the filament machine, and it fits because we measured the fan, not because a photo looked right.
The face of your fan, designed by you
The cover that clips onto a cooling-vest fan, with the pattern cut through it by you - the outer ring, the net, and what sits in the middle. Printed in ASA on the filament machine, and it fits because we measured the fan, not because a photo looked right.
148 HKD a pair - the vest has two fans. That is the print; the drawing is paid in credits, like every other route.
Tap a piece to turn it around in 3D
How this one is made
-
Say what the three zones should look like
The outer ring, the net in the middle of it, and what sits at the centre. A number from the menu, or your own words for any of them - both are read.
-
Approve the drawing
We draw your design flat and straight-on, the way it will be cut. Change it as often as you like - each drawing is paid for in credits, and the pair still costs the same to print.
-
Cut into the plate we measured
Your pattern is cut clean through our own plate, then checked before it prints: enough air to cool you, and webs thick enough to survive being clipped on and off.
-
Printed as a pair
A vest has two fans, so a pair is what you get - printed in ASA on the filament machine, in the colour you picked at the start.
Fans we have measured
A fitted part is only as good as the measurements behind it, so this list is short on purpose and grows one fan at a time.
- Cooling-vest fan, 108 mm round cover108 mm plate, four screws, 80 mm design circleOn sale
Your fan is not on the list? Send us a photo of it and the model name. Two people asking for the same fan is what gets it measured.
The workshop
Two kinds of machine, because parts are not all the same
What a piece is for decides how it is printed, and we say which before you pay for anything.
-
Resin, on LCD
Two Photon Mono M7 machines at 0.1 mm layers, up to 298 x 164 x 300 mm. Fine detail, and clear resin that light passes straight through.
-
Filament, on FDM
For parts that get handled, clipped on and off, or left in the sun. Tougher in the hand than resin, and the machine the fan cases are printed on.
-
Colour
Filament parts are printed in the colour you pick in the chat - the bot offers whatever is on the shelf. More than one colour in the same part is possible on our machine: ask, and we will quote it.
A part that has to fit something is only made from a host we have measured ourselves. We do not guess dimensions from a photograph.
Ordering
Send one message
There is no form and no cart. Message @Tm3d_bot on Telegram or WhatsApp, in English or Chinese, and it answers.
-
Tell us in words
Describe it. No photo needed. We draw a picture for you to check, then build the 3D model.
You send:
A dragon curled around a crystal, fantasy style, 10 cm tall.
-
Send a photo, keep it the same
Your toy, your pet, your thing. We model it as it is.
Photo
Make this into a figurine, just as it is.
-
Send a photo and change it
A new pose, a cuter look, a keychain or a plaque. We draw the new version for you to check first.
Photo
Make this into a small figurine, sitting pose, cute cartoon style.
-
Send your own 3D file
Already have an STL? Send it - no credits needed, you only pay for the print. Under 20 MB.
File.stl
Here is my file. Please print it 9 cm tall.
-
Design a part for something you own
The fan case is the first of these: you design the face, and we cut it into the plate we measured ourselves. Nobody asks you for a size - the fan decides it.
Fan case
I would like a pair of fan cases - a spin-style net, and my initials in the middle.
We do not make famous characters, brand logos or famous people, and a model from a photo of a person shows their general look rather than an exact likeness. A part that has to fit something is only made from a host we have measured. A shape worked out from numbers you give us. Not automatic yet - tell us what you need and we will quote it by hand.
Start
Send the first message
A photo, a sentence, or the thing you want a part for. You will see a drawing and a 3D model before there is anything to pay for a print.
The bot answers straight away. A person checks every piece before it is printed.
Credits
Credits pay for drawing your picture and building your 3D model - you see both before paying for a print. New customers start with 80 free credits.
- Picture: 9-12 credits
- 3D model: 35 credits
- Your own 3D file: free
- 50 credits HKD 50
- 80 credits HKD 70
- 200 credits HKD 160
- 500 credits HKD 350
Send "top up" or /topup to @Tm3d_bot and pick a pack. Pay by FPS, PayMe or card: a card adds the credits within a minute, FPS and PayMe once we have checked the transfer.
Card, Apple Pay and Google Pay add 3.5%. FPS and PayMe add nothing.
- Delivery is free. The price you are quoted is the whole thing, and postage never turns up as a second bill.
- Resin pieces are printed on our LCD machines and filament parts on the FDM machine. We say which before you pay.
- Terms, shipping, refunds and privacy are on the Policies page.